No, Nighthawk. I’m not receiving you. I’m sending you back to Amazon!

My British Gas smart meter and Hive system went offline – again, and I’m putting the blame firmly on the Netgear X10 Nighthawk router – the one that looks like Hela from Thor: Ragnarok.

On Saturday morning I awoke to find that the British Gas Smart Meter had taken itself offline along with the Hive thermostat and receiver (and subsequently the app). Another call to Hive support eventually got things going again, but this time I was informed that the signal strength was all over the place.

However, I have a bone to pick with Centrica and Hive support – they’ve moved their support pages without setting up 301 redirects. The result is this – a massive SEO fail:

One problem I did have after getting the system back online was that one of the Hive lightbulbs had stopped responding. My living room’s front light. So I had to turn the lighbulb on and off 7 times before it reset and was able to be picked up by the Hive system again. As these lightbulbs act as a signal booster, I was wondering if these things had any part to play in all these problems. Whenever there have been a problem with the Hive system, the lights on my Netgear ProSAFE switch were constantly flashing – all at the same time – and in time with each other. Rebooting the Netgear Nighthawk fixed this, and things settled down to their regular on/off blinking.

So I decided to send the Nighthawk back to Amazon. And this is an odd thing. Amazon sent the thing via DPD. In order to return it, I have to drop it off at a Hermes drop-off place, or via the Royal Mail. It’d be nice, given the heft of the product, if Amazon could pick it up.

I’ve been using the Fritz! Box again for the past couple of days and haven’t had any dropouts from the British Gas smart meter or Hive. I am going to try the Amplifi HD mesh system which costs slightly less than the Netgear router, but should – hopefully – be a considerably better performer. The manufacturer of the system, Ubiquiti Networks, is a highly respected company within the networking community.

In fact, I specified and arranged the purchase of their UniFi system at work. And all that was based around on the antics of MarzBar (Alex Brooks) who, at the age of 18 set-up an entire WISP (wireless internet service provider) and uses Ubiquiti kit extensively. And here’s Alex explaining how the Amplifi system works:

The first thing you’ll notice about the Netgear R9000 router is how much larger it is compared to other routers. You’ll also notice that it kind of looks like Hela from the film Thor: Ragnarok, what with the big, thick antennae poking out from back and sides of the machine.

Which is which? Difficult to tell..

It took some effort just to get the blasted thing out the packaging. But once you’ve got it out the box and plugged in, it’s an extraordinarily easy experience to get it up and running.

The box is nearly as big as my Drobo’s box
A router so premium, it’s on its own pedestal…

You have a choice of configuring the Netgear via the web interface or via an app on your phone. I chose to use the web interface. A quick set-up wizard prompts you to connect to your ISP. It was able to detect the encapsulation required, and prompt me for my ISP username and password.

Once connected, speed tests weren’t that much different from the Fritz! box, and having done a bit of digging around with the Netgear app, despite the line of sight, I’m only achieving 62% signal strength from my Mac. I also noted something really odd about the Mac. Link speed is 54Mbs despite the transmission being over 800Mbs?

54Mbs link speed on the Mac, yet connected to 802.11ac?
MacOS Mojave’s Network Utility confirms link speed

If there’s one thing I’ve noticed over the years being an Apple owner – Apple’s Wi-Fi hasn’t been terribly great with different third-party routers and Wi-Fi. Over the years when I’ve had PCs, they seem to have done a better job working with different router manufacturers. That said, when I had Virgin Media and their 300Mbs broadband connection, the SuperHub 3.0 (which is made by Netgear) never had any issues.

I’m intending on moving the router away from the brick wall and to the centre of the room. In order to do this, I’ll need 2 x 5m Cat6 cables in order to bridge the Netgear ProSafe switch where the TV, Apple TV, Sony UltraHD Blu-Ray player and the Hive Hub all reside along with the G.Fast modem. It should provide a stronger Wi-Fi signal, though I’m considering just connecting the Mac via ethernet. By bringing the router closer, it’ll make it much easier to hook it up without too much cable mess.

The Netgar Genie app conveniently maps your network and provides stats for each device.

That said, the HP printer works perfectly fine with the Netgear. With the FRITZ! Box, it constantly dropped off the network. Now it’s rock solid.

Netgear Genie apps shows signal strength of each device.

The router has confirmed that it has been able to connect to the full negotiated speed of the broadband connection here, using the Netgear Nighthawk app. Ookla speed tests from the Apple TV show regular download rates of around 122Mbs.

Even with a less than ideal signal strength, the MacBook Pro is able to achieve decent download rates – again, around 122Mbs – from the likes of iTunes and Steam.

Overall I have been very impressed with this router (and less so with the MacBook Pro), and it has a lot more tricks up its sleeve. I’ll be covering some special features that this router has that no other router has in another blog post soon.

I’ll soon be changing my broadband ISP. I’ve been with Sky Broadband for a while, but as they are unlikely to re-introduce their Pro level package which featured a static IP address among a few other features that were extremely useful, so I had to look for an alternative – especially as (a) Sky are putting up their prices and (b) I’m at the end of the contract.

So I’ll be switching to Zen Internet – hopefully sometime this week. They provide a well-respected router from German firm AVM called the FRITZ!Box 7530 which arrived today via DPD.

FRITZ! seems like an odd choice of a brand name, as I always associate the word “fritz” with the phrase – “on the fritz”, which means something is broken. Hopefully that’s not going to be the case here!

The FRITZ! Box shares the same chipset as the well-respected Draytek router range

I’ll be going from a 80Mbs down/20Mbs up connection to a G.Fast 160Mbs down/30Mbs up. Useful for downloading UltraHD content from Sky’s On Demand services. It’ll also be useful for work – especially having a static IP (which will save me £65 a year via NordVPN).

A BT engineer will need to pay a visit to replace the faceplate on the master phone socket in order to make use of G.Fast speeds (which can support speeds up to 330Mbs down and 50Mbs up – and it’s about an £8 difference between the products – if Zen proves themselves worthy, I’ll happily upgrade later down the line).

I’ll report on how things go when they happen.